Summit and Events
Global Freight Data Highlight Continuous Dependency On Asia-led Growth
Statistics Brief,
31 March 2014
Examen par les pairs du développement du fret ferroviaire au Mexique
Research Report,
1 February 2014
Дополнительная Информация К Статье 3.16 Руководства Пользователя Многосторонней Квотой ЕКМТ, 2014
Guidelines/User Guide,
1 January 2014
Дополнительная Информация к Руководству пользователя Многосторонней квотой ЕКМТ
Guidelines/User Guide,
1 January 2014
Article 3.15 and 3.16 – Provision Relating to Transit Through the Country of Registration
Guidelines/User Guide,
1 January 2014
Complementary Information to Article 3.16 of the User Guide on ECMT Multilateral Quota, 2014 and Control Procedures for Vehicles with tplw from 3.5 to 6 tonnes as from 1 January 2014
Guidelines/User Guide,
1 January 2014
The Model Certificate of Roadworthiness Test for Motor Vehicles and Trailers
Guidelines/User Guide,
1 January 2014
Model Certificate of Compliance of a Trailer with the Technical Safety Requirements
Guidelines/User Guide,
1 January 2014
Cycling, Health and Safety
Research Report, Policy Insights,
19 December 2013
- Insufficient evidence supports causality for the “safety in numbers” phenomenon – policies increasing the number of cyclists should be accompanied by risk-reduction actions.
- Efforts must be made to harmonise definitions of bicycle accident terminology so as to be able to make reliable international comparisons on cyclist safety.
- National authorities should set standards for, collect or otherwise facilitate the collection of data on non-fatal cycling crashes based on police reports and, in either a systematic or periodic way, on hospital records.
- Authorities seeking to improve cyclists’ safety should adopt the Safe System approach - policy should focus on improving the inherent safety of the traffic system, not simply on securing marginal improvements for cyclists in an inherently unsafe system.
- Authorities should establish top-level plans for cycling and cycling safety and should ensure high-level coordination among relevant government agencies to ensure that cycling grows without aggravating safety performance.
- Speed management acts as “hidden infrastructure” protecting cyclists and should be included as an integral part of cycle safety strategies.
- Cyclists should not be the only target of cycling safety policies – motorists are at least as important to target.
- Where appropriate, traffic speeds should be limited to less than 30km/hr where bicycles and motorised traffic mix but care should be taken so that speed control devices do not create hazards for cyclists.
Shifting Economic Mass Towards Emerging Economies Shown In Global Freight Data
Statistics Brief,
1 December 2013
Better Regulation of Public-Private Partnerships for Transport Infrastructure
Roundtable Report, Policy Insights,
24 September 2013
- A mix of financing models spreads risks.
- A dedicated budget for PPPs, set in relation to the rate at which future liabilities will be accumulated, can provide such a limit.
- Explicit consideration of alternative financing arrangements should be employed in determining whether to proceed with PPP projects.
- It is recommended that governments require PPP projects to pass tests of affordability and to clear the hurdle rates of return generally applied to publicly financed transport projects.
- The expected cost of PPP projects should take account of cost inflation resulting from the propensity for projects to be renegotiated.
- At the individual project level, risks should be assigned to the party best able to manage them, along with rights to make related decisions.
- Assigning demand risk is not straightforward and risk sharing arrangements are therefore common.
- Continuity of resources and expertise is essential for addressing strategic behaviour and optimism bias more generally.
- Regulatory agencies are well placed to ensure transparency and accountability by publishing reports on the criteria employed to make decisions and publishing contracts.
Global Freight Volumes Indicate Increasing Dependency On Asia-Led Growth
Statistics Brief,
30 June 2013
Model of Certificate of Compliance with Technical Provisions Concerning Exhaust and Noise Emissions and Safety Requirements for “EURO IV Safe", "EURO V safe", "EEV Safe" or "EURO VI Safe" Motor Vehicle
Guidelines/User Guide,
1 December 2012
Sharing Road Safety: Developing an International Framework for Crash Modification Functions
Research Report, Policy Insights,
1 December 2012
- Road safety policies should undergo performance and efficiency evaluations. Such evaluations cannot be undertaken without Crash Modification Functions (CMFs). Evaluation processes should be documented to ensure they are transparent.
- Research conducted to develop CMFs should follow the guidance provided in this report and, in particular, provide specific information that describes the countermeasure under consideration, the safety issue being addressed and the roadway environment in which it was tested.
- It is recommended that an international group be composed under an existing organization (e.g. Transportation Research Board, World Road Association, etc.) to foster dialog among researchers and practitioners on CMF research and reporting standards with the aim of increasing transferability of results. Coordination of research across countries on top priority countermeasures should be considered.
- International cooperation should aim to capture documentation and reporting of CMF research in a widely available transnational database.
- A concerted effort should be made to publicize the benefits of decision-making based on CMFs. This should take the form of: presentations and workshops at transport, injury prevention and health conferences; press releases; letters to political leaders and senior bureaucrats.